Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com

Job Description:

Searching for an Aircraft Quality Inspector A to join the elite team at Airbus Helicopters, Inc., where safety isn't just a metric—it’s our mission.

In this high-impact role, you are the final line of defense in ensuring the airworthiness of world-class aircraft. You will serve as a technical expert, navigating complex FAA and EASA regulations to perform critical inspections across every stage of the lifecycle—from receiving raw materials to conducting final flight-line clearances. This is a position for a meticulous professional who possesses the "inspector’s eye" for hidden damage, the technical rigor to interpret engineering drawings, and the integrity to make command decisions regarding safety of flight.

Meet The Team:

From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen.

Your Working Environment:

A suburb just outside the Dallas-Fort Worth metropolitan area is home to Airbus Helicopters U.S. regional headquarters, where we have more than 1,000 employees. Check out one of the seven professional sports teams that also call Dallas home - you may even see a special, custom Airbus helicopter dedicated to the Dallas Cowboys flying during home games.

Your Challenges:

Inspection: 60%

Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts
Perform in-process inspections for components in electrical back-shop, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint
Inspect aircraft aluminum, titanium or steel structures for cracks, corrosion, damage and improper assembly.
Determine proper shimming and joining of structures with rivets or other hardware in accordance with design drawings, engineering disposition, and other approved data
Monitor the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle
Perform stock inspections/purges when notified of possible non-conforming/suspected unapproved material
Inspect multiple airframe components to determine proper fit, form and function
Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data

Documentation: 30%

Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories
Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness
Create QN/NCs for non-conforming material detected and coordinate with Quality Engineers on non-conformity resolution
Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance)
Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and/or components
Read and validate engineering drawings, reports, and test specifications
Properly identify and document items in quality quarantine cage

Quality Department Support/Continuous Improvement: 10%

Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability
Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion
Ensure compliance with company policies, procedures and FAA & EASA Regulations
Support Company events, departmental meetings, special projects and team meetings

Your Boarding Pass:

High School Diploma or equivalent
4 years of quality inspection on aircraft components and systems---OR----6 years as a certificated aviation maintenance technician (AMT) on aircraft components systems
Current/Valid FAA Airframe & Power Plant License (MUST HAVE to be considered)
15% Domestic and International travel expectation
Must be a US Person under ITAR definition (a U.S. Citizen, green card holder or person covered under our existing ITAR license)

Preferred Education/Skills:

Associates Degree in Aviation or related industry
Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector
FAA Inspection Authorization (IA)
FCC 2nd Class License
Non Destructive Inspection (NDI) Certificate
SAP

Physical Requirements:

Onsite: 100% unless on business travel.
Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable.
Hearing: able to hear to participate in conversations in person and via teleconference or phone and able to hear sounds on production floor including safety warnings or alarms daily.
Speaking: able to speak in conversations and meetings, deliver information and participate in communications daily.
Equipment Operation: able to operate most office and personal electronic equipment and some tools daily.
Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily.
Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily.
Pushing / Pulling: able to push and pull small office furniture and some equipment and tools daily.
Sitting: able to sit for long periods of time in meetings, working on computer several times a week.
Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Daily
Standing: able to stand for discussions in offices or on production floor daily.
Travel: able to travel independently and at short notice 15% or less yearly.
Walking: able to walk through office and production areas including uneven surfaces daily.
Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site

Take your career to a new level and apply online now!

A full job description will be provided to candidates who progress to the interview stage or any candidate upon request

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

Company:

Airbus Helicopters, Inc.

Employment Type:

US - Direct Hire

Experience Level:

Professional

Remote Type:

On-site

Job Family:

Quality Inspection <JF-QU-QC>

------

Job Posting End Date: 03.07.2026

------

Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.

By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.

Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com.

See more open positions at Airbus

Privacy policy Cookie policy

Getro.org is a community-driven initiative to ease the impact of COVID-19 by connecting tech professionals and hiring companies. It's free for job seekers and companies, and curated by a growing list of referral partners.